FISH POND - IN YOUR OWN BACKYARD

FISH POND - IN YOUR OWN BACKYARD

Location

Decide first what part of the backyard you want to
your fish pond to be fixed before going out and
buying anything. Select an area where it is far from
the trees since many water plant*, like lilies, need
a sufficient add up of sunlight to grow.

Choose an area where there are no falling leaves that
can make cleaning a incubus. Do not place your pond
on low areas since large volumes of rainwater might
run off and collect in the pond during rainy
seasons. Not to mention, these runoff H2O might
contain fertilizers, pesticides, and other harmful
materials.

Place your pond in an country where it can be best
appreciated and seen. The sense of building a pond is
for you to enjoy it. Select a location wherever it can be
best considered (i.e. the sitting area or a patio in the
garden).

Types of Pond

After picking out where you want your pond to be located,
it is now time to choice what type of pond you want.
The two types of pond are the following:

ABS plastic preformed ponds are commonly used for small
ponds that can contain up to 250 gallons of water.
This type of pond gets into a variety of sizes and
shapes such as hourglass, rock gardens, and kidney.
Waterfalls and formed wasteweirs are also available.

Pond lines or liners are used for any size of pond.
The sizes available for this kind of pond is 10’ x 15’
to 20’ x 25’ or greater. This can allow you to build a
pond to your preferred size either by using it
individually or by connecting together two or more pod
Linings with a special adhesive material.

These pond liners are very heavy peculiarly the large
ones. They are usually made of rubber. Using pond
liners can be quite an fun and creative experience
since this type may allow you to decide on the shape
of your pond. All the same, you need to be aware that a 19’
x 26’ liner will not create a pond of the same size.
In choosing the proper size liner, it is jussive mood to
know the width (W), length (L), as well as the maximum
depth (MD) at their most wide-cut points. After which, use
the formula L+(MD*2) by W+(MD*2).

This means that a 10 animal foot long by 5 foot wide by 2
foot deep pond may require a 14’ x 9’ pond liner so as
to make an adjoin above the water level. It is authoritative
to let a professional pond developer help in
Checking the pond size liner you need.

Dig It

Now that you’ve decided on the location and the type
of your fish pond, it is time to dig it. The average
size of the pond is at least 18" deep at its deepest
point. However, 24" is better. With this depth, the
fishes may be allowed to stay in the pond duringwinter without freeze. Inclusion of planting
shelves in the design will make it easier to place
emergent lilies and plants.

Filtering

After actioning the above tasks, it is high time
for you to think about filtration. It peradventure better to
ask your pond professional person about this topic. Just keep
in mind that whichever filter you choose, ensure that
it is cleaned at a regular basis so that the water
will remain clear. Employing a filter may also hinder
the mosquitoes from making the pond their breeding
ground.

All Set

And now, all you get to do is add your fish and you
are good to go!